My prints are getting clipped no matter what I try to do. I am losing approximately 1/8" from all sides of the finished print. From what I can tell, the picture is actually printing larger than the specified size.
This is my process:
In the Develop module I am cropping to the desired aspect ratio using LR presets, then going straight to the print module. My printer is an HP Photosmart C4780.
In the Print module I set my margins to 0 and cell size to 4in x 6in. The picture on the screeen looks exactly how I want it to print.
I go to Page Setup, select my printer, paper size (borderless 4x6) and orientation, click OK.
Then to Print Settings, select the HP paper I am using, click borderless, click save. If I click "scale to fit paper size", I still lose approximately 1/16" on each side.
Under Image Settings, I deselect zoom to fill. I have tried selecting it but still experience clipping.
I have tried moving the margins in by fractions of an inch and I seem to recover some of the image, but its a long trial and error process that I feel I shouldn't have to do.
A 4x6 test print on regular 8.5x11 paper measures 4-1/8" x 6-1/8". The print layout in LR clearly says 4x6. ??? This is really frustrating and killing my ink! Any help is appreciated.